NEMA14 36mm koračni motor, FYSETC

FYSETC High Temperature NEMA14 36mm Motor Stepper motor (for Voron 2.4, Sherpa Mini Extruder...)

1) The drive current of the extruder needs to be adjusted to 0.35A (method: adjust the voltage to about 0.28-0.3V or adjust the E-axis drive current by firmware)
Adjust the current Reason: to prevent the motor from overheating
2) Modify the extruder pulse method
Method 1: The firmware modifies the extruder pulse:
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 665 }
Method 2: Send G code (can be sent by slicing software command):
M92 E665
M500
3) Orbiter extruder reduction ratio: 7.5:1

Application parameter reference on VORON